Starpery Heating 3.0 Upgrade & Usage Guide

To offer a more realistic experience, Starpery spent nearly a year developing Heating System 3.0, officially launched in January 2023.
Starpery Doll listened closely to customer feedback on versions 1.0 and 2.0 and made two major improvements:

• Switched to graphene heating pads for safer, faster, and more efficient heating

• Developed a dedicated Android app for real-time temperature monitoring and smarter control

Customer Feedback & Adjustments

Since launch, many customers have adopted the new system and shared valuable feedback.

As we introduced before(click here to learn more), new heating system, there are 11 areas on the body used different power to heat different parts, and embed a CPU with 10 temperature sensors to detect the temperature and power off automatically once the temperature reached the limit.

Starpery discovered that some TPE dolls experienced damage—especially in the hip area—after long heating sessions (1–2 hours). Due to TPE's lower heat resistance, prolonged exposure to high temperatures combined with body weight caused deformation.

To prevent this, Starpery have made the following adjustment:

From now on, the hip heating zone has been removed.
The system now supports 9 heating zones: chest, abdomen, thighs, vagina, calves, and back.

How to Use the Heating System

📦 What’s in the Box

Inside your package, you’ll find a black power cable and a matching plug adapter for your region. Connect the cable to the port located on the back of the doll’s neck.

🔥 How to Operate

1. Plug in the power cord to start heating.

2. Cover the doll with a blanket for better insulation.

3. Wait about 30 minutes—you’ll feel noticeable warmth.

4. Unplug the cable before use or storage.

The new heating system is pre-set with a default maximum temperature of 40°C (104°F)—our recommended optimal warmth. After approximately 30 minutes of heating, the temperature reaches the limit, and the CPU automatically shuts off power (as shown in the figure below) to maintain a safe, stable temperature.

If you're using an Android device, you can download our dedicated app to:

• Monitor real-time heating status

• View detailed temperature data

• Adjust the upper temperature limit (swipe to the last page in the app)

⚠️ Important: Increasing the temperature too high can damage TPE material. Please use caution when customizing the heat limit. ❌ iOS app is currently under development.

Heating state —— Each part will be displayed as heating up, and once the temperature reaches the limit value, the heating will automatically stop and a white finish pattern will be displayed.

⚠️ Important Reminders

• Do NOT use the heating system during intercourse.

• Always unplug the power when not in use.

• When cleaning, avoid getting water into the neck port.

• When unplugging, press the release button on the connector instead of pulling forcefully.

• TPE dolls: Limit heating sessions to under 30 minutes.

📺 Video Tutorial
Watch the full demo on how to safely use the heating system:
▶️ Click here to view

If you receive a TPE doll with a heating function, please be careful not to heat it for a long time (it is recommended to control the heating time within half an hour). Stop heating when you feel it is hot.

Any questions please contact us at first.